Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Tandem axle & Electric brakes – 3500kg brake rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Equalising suspension
• Galvanised steel wheels & commercial 195/14” tyres
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Brushed stainless steel on body panel inserts
• Tie points inside and out
• Easy lift ramp with gas struts
• Hot dipped galvanised partitions – all removable
• High impact internal side walls
• Padding on chest bars, rump bars & centre partition
• Full height lockable side entry door
• Roof rotary vents x 2
• Aluminium cladding painted with quality paint, oven baked
• Tinted front window
• Two mesh lined sliding side windows
• Front internal rug rack above front window
• Tanalised treated flooring with Superior Rubber Surfaces Seamless matting on the floor & ramp
• All On Road Costs
* 3500Kg electric brake car controller required.
• Solid dust door with gas struts
• Sink/Hobs combination
• Electric Fridge
• Solar panel package
• Awning 3m with 2.5m reach complete with poles
• Gas installation, cert & hot water cylinder
• Control panel for lights
• Cabinet on drawbar with gas bottle
• Control panel for all appliances plus 3 x internal wired in LED lights & 4 x outside roof marker lights
• 80L Water tank, guard, pump package, battery
• 2 x saddle racks & bridle hooks
• Custom made Kitchen unit – housing fridge & sink/hobs, Wardrobe with 2 shelves, section for hanging up jackets, & tack cupboard accessible from external door only, cupboard & 2 draws
• Lining on walls, doors & roof, squab upholstery
• Front seating in curve doubles up as a bed
• Opening chest bar on passengers side of horse area
• Padding on internal float sides
• Lino of floor in accommodation only
• Gas detector, Smart battery shute/charger, battery monitor
• 4 Way pop up roof vent
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1940mm/2500mm
Lengths: internal/external: 4500mm/6000mm
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Tandem axle & Electric brakes – 3500KG brake rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & Filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 195/14” tyres
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Equalising suspension
• Brushed Stainless Steel on outside side body inserts
• Tie points inside and out
• Solid dust door with gas struts
• Front gear cupboard with internal double doors
• Easy lift ramp with gas struts
• Adjustable middle partition by 50mm either way
• Tanalised treated flooring, Superior Rubber Surfaces Seamless sealed 15mm rubber matting on floor & ramp
• Aluminium cladding, quality paint, oven baked – Nado Grey
• Hot dipped galvanised partitions – 1st head divider fixed, 2nd & 3rd swing & removable
• Partitions 450mm deep, padded with drop sheets
• Black out front window
• High impact internal side walls
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Two Rotary vents & plus pop up 4 way vent
• Camera monitor with internal horse bay camera & external backing camera
• Four mesh lined sliding side windows & Tinted front window
• On Road Costs
• Wireless in car controller
• 4m Awning with 2500mm reach
* 3500Kg electric brake car controller required.
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1940mm/2500mm
Lengths: internal/external: 5000mm/6400mm
Our horse floats & trailers are fully hot dipped galvanised, and designed/made in New Zealand, and have been for the last 30 years – (we do not use Chinese steel). Buying a Fineline you will receive a quality horse float/trailer that is made for our conditions, and completely made from scratch in New Zealand. You also have the choice of colour for your float, and either brushed or mirrored stainless steel on the side panels.
• Electric fridge
• Large solar package
• Lined roof in the accommodation area
• 110L water package
• Drawbar front box for storage & gas bottle
• Gas certificate & hot water cylinder
• Solid back dust door
• Small kitchen unit to house hobs & sink
• Full partition between horse area and accommodation fixed with single opening door – (lined on accommodation side full height & horse side half height)
• LED lights
• Wrap around seating up front to also sleep on
• Shower in horse area
• Swing out 1.2m high Tack box
• Cover rack above horses rumps
• Awning – 3m long x 2.5 reach in misty grey
• Bridle & Saddle racks
• 2 hob burner & sink
• Small pull out toilet
• Wireless in car controller – float can be towed by any vehicle
• Storage rack above the front window
• Lino flooring in accommodation area
• Smart charger
• Voltage meter
* 3500Kg electric brake car controller required.
Plus added in:
• Upgraded 80L water tank to 110L water tank
• Full height wardrobe
• Camera monitor plus 2 x camera’s
• Window above the sink
• Split doors in wardrobe with shelf to separate from top wardrobe
• Extra hose outlet outside – beside the inlet
• Padding on both partitions
Dimensions:
Height internal: 2250mm
Width internal: 1940mm
Length internal: 5000mm
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Tandem axle & Electric brakes – 2500KG brake rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & Filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 185/14” tyres
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Equalising suspension
• Brushed Stainless Steel on outside side body inserts
• Tie points inside and out
• Solid dust door with gas struts
• Front gear cupboard with internal double doors
• Easy lift ramp with gas struts
• Adjustable middle partition by 50mm either way
• Tanalised treated flooring, Superior Rubber Surfaces Seamless sealed 15mm rubber matting on floor & ramp
• Aluminium cladding, quality paint, oven baked – customised Skyscraper BMW Metallic Grey
• Hot dipped galvanised partitions with front & middle head dividers
• High impact internal side walls
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Two Rotary vents
• Saddle racks & Bridle hooks
• Camera monitor with internal horse bay camera & external backing camera
• Three mesh lined sliding side windows & Tinted front window
• On Road Costs
* 3500Kg electric brake car controller required.
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1940mm/2500mm
Lengths: internal/external: 4000mm/5400mm
Fineline Floats are 100% owned, designed and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials
are used. The exterior cladding consists of lightweight aluminium, which is painted with a top quality oven baked paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Tandem axle & Electric brakes – 3500kg brake rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & Filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 195/14” tyres
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Equalising suspension
• Brushed Stainless Steel on outside side body inserts
• Tie points inside and out
• Solid back dust door with gas struts
• Front gear cupboard with internal double doors
• Easy lift ramp with gas struts
• Adjustable middle partition by 50mm either way
• Tanalised treated flooring, Superior Rubber Surfaces Seamless sealed 15mm rubber matting on floor & ramp
• Aluminium cladding, quality paint, oven baked – colour black
• Hot dipped galvanised partitions with front & middle head dividers
• High impact internal side walls
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Two Rotary vents
• Saddle racks & Bridle hooks
• Three mesh lined sliding side windows & Tinted front window
• In Car controller Wireless, can be towed by only vehicle included for 3500kg brake rated
• On Road Costs
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1940mm/2500mm
Lengths: internal/external: 4000mm/5400mm
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Tandem axle & Electric brakes – 3500kg rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Equalising suspension
• Galvanised steel wheels & commercial 185/14” tyres
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg & Spare wheel and cover
• Brushed stainless steel on body panel inserts
• Tanalised treated flooring with Superior Rubber Surfaces Seamless Sealed matting on floor & ramp
• Tie points inside and out
• Front gear cupboard with internal double doors
• Solid back dust door with gas struts & Easy lift ramp with gas struts
• Hot dipped galvanised partitions head divider/bars – removable
• High impact internal side walls
• Full padding on chest bar, rump bar & centre partition
• Full height lockable side entry door
• Roof rotary vents x 2
• Aluminium cladding painted with quality paint, oven baked – colour grey
• Tinted front window & Two mesh lined sliding side windows
• 80L Water package
• 2 x Fold up bunk beds
• External ½ door into gear locker – also accessible from inside
• Saddle & Bridle racks/hooks
• Sink/tap combination with glass top – cold water only
• Wireless in car controller – can be towed by any vehicle
• Front internal rug rack above front window
• On Road Costs
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1700mm/1800mm
Lengths: internal/external: 3800mm/5200mm
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials
are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions. The number at the end of the model relates to the internal length of the float.
• Solid fibreglass moulded roof
• Tandem axle & Electric brakes – 3500kg rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Equalising suspension
• Galvanised steel wheels & commercial 185/14” tyres
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Brushed stainless steel on body panel inserts
• Tanalised treated flooring with Superior Rubber Surfaces matting on the floor & ramp
• Tie points inside and out
• Front gear cupboard with internal single door
• Solid back dust door with gas struts
• Easy lift ramp with gas struts
• Hot dipped galvanised partitions head divider/bars – removable
• High impact internal side walls
• Padding on chest bar, rump bar & centre partition
• Full height lockable side entry door
• Roof rotary vents x 2
• Aluminium cladding painted with quality paint, oven baked – colour white
• Tinted front window
• Two mesh lined sliding side windows
• Wireless in car controller – can be towed by any vehicle
• Front internal rug rack above front window
• Bridle hooks & Saddle racks
• On Road Costs
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1700mm/1800mm
Lengths: internal/external: 3600mm/5000mm
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Trailparts Tandem axle & Electric brakes – **3500kg rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 195/14” tyres
• Equalising suspension
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Aluminium cladding painted with quality marine paint – colour of your choice or Aluminium checker plate
• Brushed or mirror stainless steel on side body & ramp panels or painted inserts
• Tanalised treated flooring
• Seamless sealed 15mm rubber matting on floor & ramp
• Tie points inside and out
• Vinyl dust cover
• Front gear cupboard with internal double doors
• Easy lift ramp with gas struts
• Hot dipped galvanised partitions with front & middle head dividers – removable
• Adjustable middle partition by 50mm either way
• High impact internal side walls
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Roof vents x 3
• Two mesh lined sliding side windows & tinted front window
• Front internal rug rack above front window
• On Road Costs
* 3500Kg electric brake car controller required.
Dimensions:
Height internal/external: 2250mm/2800mm
Width internal/external: 1940mm/2500mm
Length internal/external: 4500mm/6000mm
Bay length: 2650mm
Bay width: Adjustable
Please do not hesitate to contact us regarding any optional extra’s you may require.
Note: if any of the above brands are not available at time of build replacement of same standard will be supplied.
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Trailparts Tandem axle & Electric brakes – **3500kg rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 195/14” tyres
• Equalising suspension
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Aluminium cladding painted with quality marine paint – colour of your choice or Aluminium checker plate
• Brushed or mirror stainless steel on side body & ramp panels or painted inserts
• Tanalised treated flooring
• Seamless sealed 15mm rubber matting on floor & ramp
• Tie points inside and out
• Vinyl dust cover
• Front gear cupboard with internal double doors
• Easy lift ramp with gas struts
• Hot dipped galvanised partitions with front & middle head dividers – removable
• Adjustable middle partition by 50mm either way
• High impact internal side walls
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Roof vents x 3
• Two mesh lined sliding side windows & tinted front window
• Front internal rug rack above front window
• On Road Costs
* 3500Kg electric brake car controller required.
Dimensions:
Height internal/external: 2250mm/2800mm
Width internal/external: 1940mm/2500mm
Length internal/external: 4500mm/6000mm
Bay length: 2650mm
Bay width: Adjustable
Please do not hesitate to contact us regarding any optional extra’s you may require.
Note: if any of the above brands are not available at time of build replacement of same standard will be supplied.
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Trailparts Tandem axle & Electric brakes – **3500kg rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 195/14” tyres
• Equalising suspension
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Aluminium cladding painted with quality marine paint – colour of your choice or Aluminium checker plate
• Brushed or mirror stainless steel on side body & ramp panels or painted inserts
• Tanalised treated flooring
• Seamless sealed 15mm rubber matting on floor & ramp
• Tie points inside and out
• Vinyl dust cover
• Front gear cupboard with internal double doors
• Easy lift ramp with gas struts
• Hot dipped galvanised partitions with front & middle head dividers – removable
• Adjustable middle partition by 50mm either way
• High impact internal side walls
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Roof vents x 3
• Two mesh lined sliding side windows & tinted front window
• Front internal rug rack above front window
• On Road Costs
* 3500Kg electric brake car controller required.
Dimensions:
Height internal/external: 2250mm/2800mm
Width internal/external: 1940mm/2500mm
Length internal/external: 4500mm/6000mm
Bay length: 2650mm
Bay width: Adjustable
Please do not hesitate to contact us regarding any optional extra’s you may require.
Note: if any of the above brands are not available at time of build replacement of same standard will be supplied.
Fineline Floats are 100% owned, designed, and manufactured in New Zealand. Our chassis and frames are hot dipped galvanised, and the equalising suspension ensures a comfortable and smooth ride. Only quality high grade materials are used. The exterior cladding consists of lightweight aluminium, which is painted with a top-quality marine paint to withstand New Zealand conditions.
• Solid fibreglass moulded roof
• Trailparts Tandem axle & Electric brakes – 2500kg rated
• Lockable duo fit coupling – fits 50mm & 1 7/8” ball sizes
• Stone guard & filled in drawbar
• Hot dipped heavy duty galvanised mudguards
• Galvanised steel wheels & commercial 185/14” tyres
• Equalising suspension
• Trailparts Retractable 7” alloy heavy duty jockey wheel 250kg
• Spare wheel and cover
• Aluminium cladding painted with quality marine paint
• Brushed stainless steel on side body and ramp panel inserts
• Tanalised treated flooring
• Seamless sealed 15mm rubber matting on floor & ramp
• Tie points inside and out
• Front gear cupboard with internal single door
• Vinyl dust cover
• Easy lift ramp with gas struts
• Hot dipped galvanised partition with head divider and bars – removable
• High impact internal side walls
• Padding on chest bar, rump bar & centre partition
• Full height lockable side entry door
• Interior LED battery powered light, External LED indicators & stop lights
• Roof rotary vents x 2
• Tinted front window & grill
• On Road Costs
Dimensions:
Height internal/external: 2250mm/2880mm
Width internal/external: 1545mm/2250mm
Length internal/external: 3100mm/4600mm
Please do not hesitate to contact us regarding any optional extra’s you may require.
Note: if any of the above brands are not available at time of build replacement of same standard will be supplied.
